HG 21603-1999 回转盖快开不锈钢手孔

作者:标准资料网 时间:2024-05-17 14:41:42   浏览:8764   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:回转盖快开不锈钢手孔
中标分类: 化工 >> 化工机械与设备 >> 化工机械与设备零部件
ICS分类: 化工技术 >> 化工设备
替代情况:HGJ 512-1986
发布日期:1999-12-10
实施日期:2001-08-01
首发日期:1900-01-01
作废日期:1900-01-01
出版日期:1900-01-01
页数:5页
适用范围

本标准规定了回转盖快开不锈钢手孔的型式、基本参数、尺寸、技术要求和有关使用规定。本标准适用于无冲击工作压力小于等于PN0.6MPa,工作温度为大于-20~200℃,升温降压可以适用于工作温度300℃的回转盖快开不锈钢手孔。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 化工 化工机械与设备 化工机械与设备零部件 化工技术 化工设备
下载地址: 点击此处下载
【英文标准名称】:Textilefloorcoverings--Part7:Determinationofthicknesslossunderdynamicloading
【原文标准名称】:铺地纺织物.第7部分:在动态载荷下厚度损耗的测定
【标准号】:JISL1021-7-2007
【标准状态】:现行
【国别】:日本
【发布日期】:2007-03-20
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JP-JISC)
【起草单位】:TechnicalCommitteeonConsumerLifeProducts
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:この規格は,摩擦を伴った動的荷重試験機による繊維製床敷物の厚さ減少試験方法及び動的荷重試験機による繊維製床敷物の厚さ減少試験方抜について規定する。
【中国标准分类号】:W56
【国际标准分类号】:59_080_60
【页数】:12P;A4
【正文语种】:日语


Product Code:SAE AS161
Title:Lifting Eye-Propeller Shaft
Issuing Committee:Age-2d Packaging, Handling And Transportability Committee
Scope:This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospace components, especially in electronic component evaluation and radiographic film and paper classification. Individual image quality indicators (IQIs) are classified by use of this standard number, followed by appropriate codes. Synopsis of the classification system is: AS 1613-A-XX IQI, with six tungsten wires; and AS 1613-B-XX IQI, with six tungsten wires and six lead beads.